1. Fundamentals

Measurement Tools — Quiz

Test your understanding of measurement tools with 5 practice questions.

Practice Questions

Question 1

A student is using an oscilloscope to observe a sinusoidal waveform. If the waveform spans $6$ vertical divisions from peak-to-peak and the Volts/Div setting is $500 \text{ mV/Div}$, what is the peak-to-peak voltage of the signal?

Question 2

When using a function generator to test the frequency response of a filter, which parameter is most critical to adjust to observe the filter's characteristics across its operating range?

Question 3

An oscilloscope is displaying a square wave with a period of $200 \text{ \mu s}$. If the Time/Div setting is $50 \text{ \mu s/Div}$, how many horizontal divisions will one complete cycle of the square wave occupy?

Question 4

What is the primary safety concern when using a multimeter to measure high voltages (e.g., above $50 \text{ V}$ AC or $120 \text{ V}$ DC)?

Question 5

A multimeter is set to measure resistance. When the probes are connected to a component, the display shows an extremely high resistance value, often indicated as 'OL' (Over Limit) or '1' (for some meters). What does this typically indicate about the component?